High current power supplies/chargers
ALP-P3A
- Switch selectable 6-12-24 VDC output
- 3 amps continuous power supply current at 6-12-24 VDC
- Maximum battery charge current 350mA
- AC input and DC output LED indicators
- PTC Battery Protection
ALP-P5A
- Switch selectable 6-12-24 VDC output
- 5 amps continuous power supply current at
6-12-24 VDC
- Maximum battery charge current 350mA
- AC input and DC output LED indicators
- PTC battery protection
ALP-P10A
- Switch selectable 12-24 VDC output
- 10 amps continuous power at 12-24 VDC
- Maximum battery charge current 700mA
- AC input & DC output LED indicators
- Thermal overload and short circuit protection
Power distribution boards
ALP-DMOD-4OUT, ALP-DMOD-8OUT 
- Converts single AC or DC input into 4 or 8 individually fused outputs, respectively
- Fuses are rated at 3 amp and up to 5 amp fuses may be used
- Up to 28 VAC/VDC
- AC power LED indicator; individual output LEDS
- Surge protected outputs
- Power on/off switch
Linear power supply/charger
ALP-LPS6-24VDC 
- AC input and DC output LED indicators
- 6, 12 or 24 VDC selectable output
- Filtered and electronically regulated output
- Maximum battery charge current 300mA
- 1.5 amp continuous current rating at 6 and 12 VDC
- 1 amp continuous current rating at 24 VDC
- Thermal overload and short circuit protection with auto reset
- PTC battery protection
Access power controller
ALP-AMOD8
- 12 to 24 Volt, AC or DC operation
- Flexible power supply input options
- 8 Access control system trigger inputs
- 8 independently controlled outputs
- 8 auxiliary power outputs
- Output fuses rated at 3A, main fuse rated at 10 amps
- Red LEDs indicate outputs are energized
- Flexible fire alarm disconnect input and output options
- FACP output relay rated at 1 amp, 28 VDC
Relay module
ALP-RB6-24VDC
- 12 or 24 VDC selectable operation
- Coil draws 120mA
- 5 amp/120 VAC/28 VDC DPDT contacts
- DC LED indicator
Break away relay 6-pak
ALP-RB1224VDC/6
- AC input and DC output LED
- 6 or 12 VDC selectable operation
- Form “C” 10 amp/120 VAC or 28 VDC relay contact
- Coil draws 50mA
- 5 amp/120 VAC/28 VDC DPDT contacts
- LED indicates when relay is energized
12/24VDC programmable timer
ALP-PTM
- Multipurpose applications, e.g., access control, siren/bell cut off module, dialer delay, guard tour supervisory time, etc.
- Fast, accurate time ranges from 1 sec. to 60 min.
- LED indicates relay is energized.
- Form “C” relay contacts are 8 amps at 120VAC/28VDC.
- Current draw: Standby 3mA, relay energized 40mA.
- Triggers via positive DC voltage, dry contact closure, or removal of contact closure.
- Selectable relay activation at the start or end of the timing cycle. Built-in reset.
- Also available: Single Channel (NPDTM7D24H) and Dual Channel Annual Timers (NP-DTM7D24H-D) also available.
Transformers
Model # ....................Description
ALP-TRF1650..........16VAC 50VA Plug in
ALP-TRF2450..........24VAC 50VA Plug in
ALP-TRF2410..........24VAC 100VA
ALP-TRF28100........28VAC 100VA
ALP-TRF28175........28VAC 175VA
ALP-TRF28300........28VAC 300VA
Universal power supply cabinet
ALP-PSC500
- Large latching cabinet for use with Platinum Power supplies & transformers
- Matched pre-drilled mounting holes for easy use universally in the Napco line
