Strikes for model 11A:
Model 210K
- Strike for single or double inswinging door(s) (not included with 11A)
Model K24A
- Strike for single outswinging door (included with 11A)
Model K28
- Strike for double outswinging doors (not included with 11A)
Security Door Locks: Narrow stile mounting bars
Model 99
(pair) not shown
- 3/8” x 1” anodized aluminum narrow stile mounting bar – US28 finished. For mounting Model 11A to narrow stile (glass) doors. Specify 36” or 48”. (Not Shown)
High Security Door Lock Add-On: Rim cylinder
Model CER
- Rim cyliner required for interior arming/disarming of models 11A, 80, 250, 260, 700, 710 & 715. Includes two keys (KA or KD)
Mortise cylinder
Model CEM
- Mortise cylinder used with the Pilfergard models PG10 and PG21/E to arm and disarm the alarm circuit. Includes two keys (KA or KD)
Cylinder finger pull
Model 711
- An inexpensive door cylinder finger pull for use when outside key only access is required.
Outside access door pull
Model 707
- Outise door pull for access from building exteriors. Installed on the outside of the door and linked to the lock. After deadbolt is retracted by outside key, a slight pull will release the deadlatch and open the door. 8” x 1 1/2”. (For use with all models except Model 11A).
Battery eliminator 
Model PP100
- For use with all PG10, PG21/E, PG30, 250, 700, 80, 260, 710 and 715 models. The PP100 conserves the battery which automatically takes over as the power source to sound the alarm in the event of a power failure or intentional cut-off. A built-in circuit breaker with push-button reset eliminates troublesome fuse replacements. Includes a cam lock cylinder and 6’ of armored cable adequate to provide a door loop at the hinged-side of the door. Can be used with all 6V and 9V models.
Double door holder
Model 44
- The Double Door Holder secures the inactive door to the frame while the active door is closed. Releasing the active door automatically allows both doors to swing freely. Reversible, right or left hand doors. Cast aluminum 8 1/2” long, 3” wide and 2 1/2” high.
Armored door loop 
Model 271
- For use with electrified locks. An easy means for bringing electric current from the hinge side of a door frame to the door. 18” flexible armored cable. End brackets are deep drawn anodized aluminum to conceal wire connections.
Single door strike
Models 730 & 725
- Model 730 single door strike supplied with models 250, 700 and 80.
- Model 730M single door strike supplied with models 260 and 710 and 80. • Model 735 supplied with model 715.
Double door strike 
Models 732 & 735
- Model 732 double door strike for use with models 250, 700 and 80.
- Model 732M double door strike for use with models 260 and 710.
- Model 735 double door strike for use with model 715. (Not Shown)
